Hydrostatic testing ：70MPA
Voltage detection ：550AC/DC
Contact resistance ：0.01Ω
Insulation resistance： 200MΩ
Electric current ：Single core 5A
Mounting thread ：7/16-20UNF-2A
Thread length ：16mm or 19mm
Standard configuration ：316L
Locking cap material：POM
Plugging times ：≥500
Working temperature ：-40-80
Through hole: 11.3mm
Installation requirements ：The diameter around the installation thread hole is within the range of 25mm, and the end surface roughness is above Ra1.6.
Matters needing attention ：Be sure to apply conductive silicone oil before inserting and removing each time. When pulling out, pull out the cable directly, do not twist left or right. Avoid sharp Angle bending of the cable.
