https://manchengmarine.com/contact-us/
Waterproof connectors Applications
- Offshore oil and gas, renewable energy and subsea systems
- Defence systems and equipment
- Oceanographic systems, equipment and instrumentation solutions
- Remotely Operated Vehicle (ROV) and Remotely Operated Towed Vehicle (ROTV) systems
- Underwater camera, video and lighting systems
- Ocean bottom seismic systems
- Diving systems and equipment
Waterproof connectors Options
- Customised harness cables and direct moulding to selected polyurethane (PUR) cables
- Customer specified cable, wire leads and bulkhead thread lengths
- Customer specified connector body material
- Certified pressure testing to specific ocean depths
Subconn/Seacon connectors catalogue
Subconn/Seacon Product specifications：
Subconn/Seacon connectors cables:
1 Red |2 Black| 3 Yellow| 4 Blue |5 Orange| 6 Brown |7 Purple |8 Green
1 Red| 2 Red and White |3 Black |4 Black and White| 5 Yellow| 6 Yellow and White |7 Blue |8 Blue and White |9 Orange |10 Orange and White |11 Brown| 12 Brown and White
Hydraulic test: 70MPA
Voltage detection: 550AC/DC
Contact resistance: 0.01Ω
Insulation resistance: 200MΩ
Current: Single core 10A
Mounting thread: 5/8-18UNF-2A
Thread length: 16mm 19mm
Standard configuration: 316L
Material of locking cap: POM
Insertion and removal times: ≥500
Operating temperature: -40-80
Through hole: 16.2mm
Installation requirements: The diameter around the installation thread hole should be within 25mm, and the end surface roughness should be above Ra1.6.
Note: Be sure to apply conductive silicone oil before each insertion and removal. When pulling out, pull the cable directly out without twisting it to the left or right. Avoid bending cables at sharp angles.
Reviews
There are no reviews yet.